DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
The Uno R3 with Cable is a micro-controller board base on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Let’s discuss each component in detail.
Why is Arduino recommended over other boards for beginners?
The USB port in the Arduino board is used to connect the board to the computer using the USB cable. The cable acts as a serial port and as the power supply to interface the board. Such dual functioning makes it unique to recommend and easy to use for beginners.
What is the main difference between Arduino UNO and Arduino Nano?
The Arduino Nano has a compact size and mini USB cable than the Arduino UNO.
What is the main difference between Arduino UNO and Arduino Mega?
The Arduino UNO is a standard board recommended to beginners, while Arduino Mega is used for complex projects due to its greater memory space.
Memory
The memory structure is shown in the below image:
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Specification
| Display | 7” TFT |
| Resolution | 800 x 480 |
| Brightness (cd/m2) | 400 |
| Contrast Ratio | 800:1 |
| Backlight Type | LED |
| Backlight Life Time | >30,000 hrs. |
| Colors | 16.7M |
| LCD Viewing Angle (T/B/L/R) | 80/60/80/80 |
| Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% |
| Flash | 128 MB |
| RAM | 128 MB |
| Processor | 32-bit RISC 600MHz |
| SD Card Slot | N/A |
| USB Host | USB 2.0 x 1 |
| USB Client | N/A |
| Ethernet | 10/100 Base-T x 1 |
| COM Port | COM1: RS-232,COM2: RS-485 2W/4W,COM3: RS-485 2W |
| RS-485 Dual Isolation | N/A |
| CAN Bus | N/A |
| HDMI | N/A |
| Audio Output | N/A |
| Video Input | N/A |
| RTC | Built-in |
| Input Power | 24±20% VDC |
| Power Isolation | Built-in |
| Power Consumption | 450mA@24VDC |
| Voltage Resistance | 500VAC (1 min.) |
| Isolation Resistance | Exceed 50MW at 500VDC |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) |
| PCB Coating | Yes |
| Enclosure | Plastic |
| Dimensions WxHxD | 189.6 x 137.1 x 34.3 mm |
| Panel Cutout | 174.6 mm x 113.6 mm |
| Panel Thickness | 1.5 mm [0.06”] ~ 3.5 mm [0.13”] |
| Weight | Approx. 520 g |
| Mount | Rear mount |
| Protection Structure | NEMA4 / IP65* |
| Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) |
| Operating Temperature | 0° ~ 50°C (32° ~ 122°F) |
| Relative Humidity | 10% ~ 90% (non-condensing) |
| CE | CE marked |
| Software | EasyBuilder Pro V4.10.04 or later versions |
* Brand new product in its original packaging covered by the warranties and certifications provided by WEINTEK
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
PLC, FX3U-48MR/ES-A Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 relay outputs
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
NEWEST RFID Starter Kit for Arduino UNO R3 Arduino advance Learning Kit With Retail Box
IIT RFID Starter Kit For Arduino UNO R3 Upgraded Version Learning Suite With Retail Box For Your DIY Porject
Comes with high-quality material, is in a trendy design, and comfortable to use.
The RFID Learning Suite is the entry point for the main package upgrade, and the update location is mainly at:
Package Included:
DVP10SX11T Delta PLC 24VDC 2AI/2AO 4DI/2DO transistor
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10>+10V)
Analog Out: 2 points (-20>20mA _ -10>+10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
DVP04AD-S,Delta Analog Output Module
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ +8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Manuals
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
Catch Daily Deals!
Go to Daily Deals Section
Trending products
See All Trending productsDIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
The Uno R3 with Cable is a micro-controller board base on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Let’s discuss each component in detail.
Why is Arduino recommended over other boards for beginners?
The USB port in the Arduino board is used to connect the board to the computer using the USB cable. The cable acts as a serial port and as the power supply to interface the board. Such dual functioning makes it unique to recommend and easy to use for beginners.
What is the main difference between Arduino UNO and Arduino Nano?
The Arduino Nano has a compact size and mini USB cable than the Arduino UNO.
What is the main difference between Arduino UNO and Arduino Mega?
The Arduino UNO is a standard board recommended to beginners, while Arduino Mega is used for complex projects due to its greater memory space.
Memory
The memory structure is shown in the below image:
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Specification
| Display | 7” TFT |
| Resolution | 800 x 480 |
| Brightness (cd/m2) | 400 |
| Contrast Ratio | 800:1 |
| Backlight Type | LED |
| Backlight Life Time | >30,000 hrs. |
| Colors | 16.7M |
| LCD Viewing Angle (T/B/L/R) | 80/60/80/80 |
| Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% |
| Flash | 128 MB |
| RAM | 128 MB |
| Processor | 32-bit RISC 600MHz |
| SD Card Slot | N/A |
| USB Host | USB 2.0 x 1 |
| USB Client | N/A |
| Ethernet | 10/100 Base-T x 1 |
| COM Port | COM1: RS-232,COM2: RS-485 2W/4W,COM3: RS-485 2W |
| RS-485 Dual Isolation | N/A |
| CAN Bus | N/A |
| HDMI | N/A |
| Audio Output | N/A |
| Video Input | N/A |
| RTC | Built-in |
| Input Power | 24±20% VDC |
| Power Isolation | Built-in |
| Power Consumption | 450mA@24VDC |
| Voltage Resistance | 500VAC (1 min.) |
| Isolation Resistance | Exceed 50MW at 500VDC |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) |
| PCB Coating | Yes |
| Enclosure | Plastic |
| Dimensions WxHxD | 189.6 x 137.1 x 34.3 mm |
| Panel Cutout | 174.6 mm x 113.6 mm |
| Panel Thickness | 1.5 mm [0.06”] ~ 3.5 mm [0.13”] |
| Weight | Approx. 520 g |
| Mount | Rear mount |
| Protection Structure | NEMA4 / IP65* |
| Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) |
| Operating Temperature | 0° ~ 50°C (32° ~ 122°F) |
| Relative Humidity | 10% ~ 90% (non-condensing) |
| CE | CE marked |
| Software | EasyBuilder Pro V4.10.04 or later versions |
* Brand new product in its original packaging covered by the warranties and certifications provided by WEINTEK
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
PLC, FX3U-48MR/ES-A Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 relay outputs
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
NEWEST RFID Starter Kit for Arduino UNO R3 Arduino advance Learning Kit With Retail Box
IIT RFID Starter Kit For Arduino UNO R3 Upgraded Version Learning Suite With Retail Box For Your DIY Porject
Comes with high-quality material, is in a trendy design, and comfortable to use.
The RFID Learning Suite is the entry point for the main package upgrade, and the update location is mainly at:
Package Included:
DVP10SX11T Delta PLC 24VDC 2AI/2AO 4DI/2DO transistor
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10>+10V)
Analog Out: 2 points (-20>20mA _ -10>+10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
DVP04AD-S,Delta Analog Output Module
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ +8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
Laptops & Computers
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
The Uno R3 with Cable is a micro-controller board base on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Let’s discuss each component in detail.
Why is Arduino recommended over other boards for beginners?
The USB port in the Arduino board is used to connect the board to the computer using the USB cable. The cable acts as a serial port and as the power supply to interface the board. Such dual functioning makes it unique to recommend and easy to use for beginners.
What is the main difference between Arduino UNO and Arduino Nano?
The Arduino Nano has a compact size and mini USB cable than the Arduino UNO.
What is the main difference between Arduino UNO and Arduino Mega?
The Arduino UNO is a standard board recommended to beginners, while Arduino Mega is used for complex projects due to its greater memory space.
Memory
The memory structure is shown in the below image:
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Specification
| Display | 7” TFT |
| Resolution | 800 x 480 |
| Brightness (cd/m2) | 400 |
| Contrast Ratio | 800:1 |
| Backlight Type | LED |
| Backlight Life Time | >30,000 hrs. |
| Colors | 16.7M |
| LCD Viewing Angle (T/B/L/R) | 80/60/80/80 |
| Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% |
| Flash | 128 MB |
| RAM | 128 MB |
| Processor | 32-bit RISC 600MHz |
| SD Card Slot | N/A |
| USB Host | USB 2.0 x 1 |
| USB Client | N/A |
| Ethernet | 10/100 Base-T x 1 |
| COM Port | COM1: RS-232,COM2: RS-485 2W/4W,COM3: RS-485 2W |
| RS-485 Dual Isolation | N/A |
| CAN Bus | N/A |
| HDMI | N/A |
| Audio Output | N/A |
| Video Input | N/A |
| RTC | Built-in |
| Input Power | 24±20% VDC |
| Power Isolation | Built-in |
| Power Consumption | 450mA@24VDC |
| Voltage Resistance | 500VAC (1 min.) |
| Isolation Resistance | Exceed 50MW at 500VDC |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) |
| PCB Coating | Yes |
| Enclosure | Plastic |
| Dimensions WxHxD | 189.6 x 137.1 x 34.3 mm |
| Panel Cutout | 174.6 mm x 113.6 mm |
| Panel Thickness | 1.5 mm [0.06”] ~ 3.5 mm [0.13”] |
| Weight | Approx. 520 g |
| Mount | Rear mount |
| Protection Structure | NEMA4 / IP65* |
| Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) |
| Operating Temperature | 0° ~ 50°C (32° ~ 122°F) |
| Relative Humidity | 10% ~ 90% (non-condensing) |
| CE | CE marked |
| Software | EasyBuilder Pro V4.10.04 or later versions |
* Brand new product in its original packaging covered by the warranties and certifications provided by WEINTEK
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
PLC, FX3U-48MR/ES-A Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 relay outputs
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
NEWEST RFID Starter Kit for Arduino UNO R3 Arduino advance Learning Kit With Retail Box
IIT RFID Starter Kit For Arduino UNO R3 Upgraded Version Learning Suite With Retail Box For Your DIY Porject
Comes with high-quality material, is in a trendy design, and comfortable to use.
The RFID Learning Suite is the entry point for the main package upgrade, and the update location is mainly at:
Package Included:
DVP10SX11T Delta PLC 24VDC 2AI/2AO 4DI/2DO transistor
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10>+10V)
Analog Out: 2 points (-20>20mA _ -10>+10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
DVP04AD-S,Delta Analog Output Module
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ +8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
Smartphones & Tablets
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
The Uno R3 with Cable is a micro-controller board base on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Let’s discuss each component in detail.
Why is Arduino recommended over other boards for beginners?
The USB port in the Arduino board is used to connect the board to the computer using the USB cable. The cable acts as a serial port and as the power supply to interface the board. Such dual functioning makes it unique to recommend and easy to use for beginners.
What is the main difference between Arduino UNO and Arduino Nano?
The Arduino Nano has a compact size and mini USB cable than the Arduino UNO.
What is the main difference between Arduino UNO and Arduino Mega?
The Arduino UNO is a standard board recommended to beginners, while Arduino Mega is used for complex projects due to its greater memory space.
Memory
The memory structure is shown in the below image:
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Weinview Easyview Weintek 8071 Monitor Touch screen HMI Inch Resistive Touch Screen Panel MT8071IE
Specification
| Display | 7” TFT |
| Resolution | 800 x 480 |
| Brightness (cd/m2) | 400 |
| Contrast Ratio | 800:1 |
| Backlight Type | LED |
| Backlight Life Time | >30,000 hrs. |
| Colors | 16.7M |
| LCD Viewing Angle (T/B/L/R) | 80/60/80/80 |
| Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% |
| Flash | 128 MB |
| RAM | 128 MB |
| Processor | 32-bit RISC 600MHz |
| SD Card Slot | N/A |
| USB Host | USB 2.0 x 1 |
| USB Client | N/A |
| Ethernet | 10/100 Base-T x 1 |
| COM Port | COM1: RS-232,COM2: RS-485 2W/4W,COM3: RS-485 2W |
| RS-485 Dual Isolation | N/A |
| CAN Bus | N/A |
| HDMI | N/A |
| Audio Output | N/A |
| Video Input | N/A |
| RTC | Built-in |
| Input Power | 24±20% VDC |
| Power Isolation | Built-in |
| Power Consumption | 450mA@24VDC |
| Voltage Resistance | 500VAC (1 min.) |
| Isolation Resistance | Exceed 50MW at 500VDC |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) |
| PCB Coating | Yes |
| Enclosure | Plastic |
| Dimensions WxHxD | 189.6 x 137.1 x 34.3 mm |
| Panel Cutout | 174.6 mm x 113.6 mm |
| Panel Thickness | 1.5 mm [0.06”] ~ 3.5 mm [0.13”] |
| Weight | Approx. 520 g |
| Mount | Rear mount |
| Protection Structure | NEMA4 / IP65* |
| Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) |
| Operating Temperature | 0° ~ 50°C (32° ~ 122°F) |
| Relative Humidity | 10% ~ 90% (non-condensing) |
| CE | CE marked |
| Software | EasyBuilder Pro V4.10.04 or later versions |
* Brand new product in its original packaging covered by the warranties and certifications provided by WEINTEK
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
PLC, FX3U-48MR/ES-A Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 relay outputs
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
NEWEST RFID Starter Kit for Arduino UNO R3 Arduino advance Learning Kit With Retail Box
IIT RFID Starter Kit For Arduino UNO R3 Upgraded Version Learning Suite With Retail Box For Your DIY Porject
Comes with high-quality material, is in a trendy design, and comfortable to use.
The RFID Learning Suite is the entry point for the main package upgrade, and the update location is mainly at:
Package Included:
DVP10SX11T Delta PLC 24VDC 2AI/2AO 4DI/2DO transistor
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10>+10V)
Analog Out: 2 points (-20>20mA _ -10>+10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
DVP04AD-S,Delta Analog Output Module
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ +8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
