Product Carousel Tabs
1HP 230V Delta VFD-M VFD, Inverter, AC Drive VFD007M21A
Delta Inverter 5.5 KW VFD055M43A 3 Phase 380V to 460V Rated 13A 100% New 5500W VFD Series Invertor Variable Speed AC Motor Drive
Delta Inverter 5.5 KW VFD055M43A 3 Phase 380V to 460V Rated 13A 100% New 5500W VFD Series Invertor Variable Speed AC Motor Drive
Delta VFD055M43A – SVC Micro Drives
Delta Products
AC Drives, VFD-M Series
ITEM # VFD055M43A
MFG # VFD055M43A
Series VFD-M
Drive, AC, 7.5HP, 460V, 3PH
Specifications
Item Number: VFD055M43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: VFD-M
Nominal Input VAC: 480 Volts AC
Input Range VAC: 380 to 480 Volts AC
HP (CT): 7.5 Horsepower
Amps (CT): 13 Amps
Input Phase: 3
Operator Controls: Keypad Included
Max. Frequency: 400 Hertz
Braking Type: DC Injection;Dynamic Braking
Motor Control-Max Level: Open Loop Vector (Sensorless Vector)
Closed Loop: No
AC Line Regenerative?: No
Dynamic Braking Trans?: Included
Enclosure Rating: IP20
Delta PLC ,DVP20SX211T
DVP-16SM11N | DELTA | I/O Extension Module DVP-16SM11N | DELTA | I/O Extension Module
FX2N-80MR-001 Electric Fx2n Series Programmable
Specifications
| Attribute | Value |
| For Use With | FX2N Series |
| Manufacturer Series | FX2N |
| Number of Inputs | 40 (Digital) |
| Output Type | Relay |
| Input Type | Digital |
| Voltage Category | 100 → 240 V ac |
| Number of Outputs | 40 (Relay) |
| Communication Port Type | RS232, RS422, RS485 |
| Program Capacity | 8000 Steps |
| Programming Language Used | Ladder Logic |
| Mounting Type | DIN Rail |
| Programming Interface | Computer |
| Length | 90mm |
| Dimensions | 90 x 285 x 87 mm |
| Battery Backup | Yes |
| Depth | 87mm |
| Number of Communication Ports | 1 |
| Width | 285mm |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | +55°C |
| Output Current | 2 A |
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Manuals
1HP 230V Delta VFD-M VFD, Inverter, AC Drive VFD007M21A
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
E40S8-1000-3-N-24,Rotary encoder
Encoder, Incremental, Ø40mm, 8mm Shaft, 1000 PPR, A,B,Z, Totem pole output, 12-24VDC
Data sheet
| Shaft outer diameter | Ø8mm |
|---|---|
| Max. response frequency | 300kHz |
| Max. allowable revolution | 5000rpm |
| Starting torque | Max. 40gf.cm(max. 0.00392N.m) |
| Resolution | 1000P/R |
| Output phase | A, B, Z |
| Control output | Totem pole |
| Power supply | 12-24VDC  ±5%(ripple P-P: max. 5%) |
| Connection type | Radial cable type |
| Protection structure | IP50 |
| Approval |  |
| Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Accessories | Ø6mm coupling standard, Ø8mm coupling(sold separately) |
| Weight | Approx. 120g |
Brand :Autonics
China
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
Computers & Laptops
Smartphones & Tablets
Trending products
See All Trending productsDIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
DIY Starter Kit: Arduino Uno R3,Breadboard, Jumper Wires,USB Cable,9V Connector. (Made in China )
The Uno R3 with Cable is a micro-controller board base on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Let’s discuss each component in detail.
Why is Arduino recommended over other boards for beginners?
The USB port in the Arduino board is used to connect the board to the computer using the USB cable. The cable acts as a serial port and as the power supply to interface the board. Such dual functioning makes it unique to recommend and easy to use for beginners.
What is the main difference between Arduino UNO and Arduino Nano?
The Arduino Nano has a compact size and mini USB cable than the Arduino UNO.
What is the main difference between Arduino UNO and Arduino Mega?
The Arduino UNO is a standard board recommended to beginners, while Arduino Mega is used for complex projects due to its greater memory space.
Memory
The memory structure is shown in the below image:
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
MITSUBISHI ,FX3U-48MT/ES-A PLC, FX3U Base Unit AC 100-240 V; 24 inputs DC 24 V; 24 transistor outputs; sink Standard Material
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local + Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
1HP 230V Delta VFD-M VFD, Inverter, AC Drive VFD007M21A
DVP16SP11R Delta PLC Expansion Module DVP-S
DVP16SP11R Delta Plc DVP-S expansion module
The DVP-S series of Delta PLCs offer a wide variety of hardware configurations, communication, power and computing capabilities to meet the most diverse needs in industrial automation.
Whether your automation project is large or small, the DVP-S Series PLCs are the right choice at the right price.
Can be used with Delta SS / SA / SE / SX / SV / MC PLCs
The Delta DVP-16SP11R series is an Input/Output expansion module for slimline industrial PLCs from Delta Electronics. The Delta DVP-16SP11R is equipped with an expansion bus that allows additional modules to be mounted on the right side without external wiring.
The DVP-16SP11R expansion module with its mixed configuration of 8 inputs and 8 outputs is the most flexible choice if you need to implement your automation project with additional sensors and actuators.
E40S8-1000-3-N-24,Rotary encoder
Encoder, Incremental, Ø40mm, 8mm Shaft, 1000 PPR, A,B,Z, Totem pole output, 12-24VDC
Data sheet
| Shaft outer diameter | Ø8mm |
|---|---|
| Max. response frequency | 300kHz |
| Max. allowable revolution | 5000rpm |
| Starting torque | Max. 40gf.cm(max. 0.00392N.m) |
| Resolution | 1000P/R |
| Output phase | A, B, Z |
| Control output | Totem pole |
| Power supply | 12-24VDC ±5%(ripple P-P: max. 5%) |
| Connection type | Radial cable type |
| Protection structure | IP50 |
| Approval | |
| Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Accessories | Ø6mm coupling standard, Ø8mm coupling(sold separately) |
| Weight | Approx. 120g |
Brand :Autonics
China
DVP-16SP11T Delta PLC Extension module
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
FX2N-48MR-001 | MITSUBISHI PLC FX2N-48MR-001
FX2N-48MR-001 datasheetPDF datasheet
FX2N-48MR-001 PROGRAMMING MANUAL IIMITSUBISHI FX2N-48MR-001 Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX2N-48MR-001
Max input / output points: 48 points.
Supply voltage: 100 – 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: relay.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
Headphones & Virtual Reality