FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O FX3U-32MT/ES-A | Mitsubishi Electric | Main Units with 32 I/O
- Manufacturer : Mitsubishi Electric
- Product No : FX3U-32MT / ES-A
- Product type : Main units with 32 I/O
- FX3U-32MT / ES-A is the third generation in their family FX Series PLC is a compact PLC and successful form of Mitsubishi Electric.
- A new special feature is the system “bus adapter” supplemented for bus systems useful for extended special features and block network communications.
- Extended special features and block network communications.
- Maximum Likelihood can expand up to 10 blocks on the new bus.
- The CPU with 32 I / O: 16 inputs and 16 outputs transistor (S)
- Power supply: 100 -240 VAC
- Power: 35 W
- Memory program: 64,000 Steps
- Integrated real-time clock: 16 (100 Khz).
- Counter: 235
- Timer: 512
- Integrated portal RS232C, RS485
- Origin: Mitsubishi – Japan
- Shipping Weight: 2 kg
Original price was: 26,000.00৳ .24,000.00৳ Current price is: 24,000.00৳ .
- Manufacturer : Mitsubishi Electric
- Product No : FX3U-32MT / ES-A
- Product type : Main units with 32 I/O
Related Products
PLC DVP12SE11
- No of Inputs: 14 Digits
- Power: 24 V DC
- PLC Brand :Delta
- Minimum Order: Quantity 1 Piece
Out of stock
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-16EX-ES/UL
- Product type : Input Module Extension Block
- Integrated Inputs : 16 (24 VDC)
- Integrated Inputs / Outputs : 16
- ON Voltage (Max.) : Relay version: < 240 VAC, < 30 VDC; Transistor version: 5 – 30 VDC; Triac version: 85 – 242 VAC
- Stocked Item : S
- 5VDC Current Consumption (mA) : 4
2 in stock
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ 8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
2 in stock
BRAND :MITSUBISHI
PART NO :FX5-8AD
PRODUCT TYPE :ANALOG INPUT MODULE
CONDITION : NEW
Ask Price
CONTRY OF ORIGEN : JAPAN
ORDER(MOQ) : ONE
AFTER SALES, SERVICE : AVAILABL
1 in stock
| odel | ATO-DVP-ES2 | ||||||
| Builit-in I/O | 16 / 20 / 24 / 32 / 40 / 60 I/O points | ||||||
| Power Supply | 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5% | ||||||
| Connector | European standard removable terminal block (Pin pitch: 5mm) | ||||||
| Operation | ATO-DVP-ES2 PLC starts to run when the power rises to 95~100V AC and stops when the power drops to 70V AC. If the power is suddenly cut off, the PLC will continue running for 10ms. |
||||||
| Power Supply Fuse | 2A / 250V AC | ||||||
| Power Consumption | 30VA | ||||||
| DC 24V Current Output *1 | 500mA | ||||||
| Power Supply Protection | DC 24V output short circuit protection | ||||||
| Voltage Withstand | 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE) | ||||||
| Insulation Resistance | >5MΩ at 500VDC (between all I/O points and ground) | ||||||
| Noise Immunity | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
||||||
| Grounding | The diameter of grounding wire shall not be less than that of L, N terminal of the power supply. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
||||||
| Environment | Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2 Storage: -25°C~70°C (temperature), 5~95% (humidity) |
||||||
| Approvals | UL508, European community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC | ||||||
| Vibration/Shock Immunity | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||||||
| Weight | See below “Selection Table” | ||||||
| Note: *1. It is suggested that the power output should not be supplied to HMIs. |
|||||||
2 in stock
FX2N-48MR-001 datasheetPDF datasheet
FX2N-48MR-001 PROGRAMMING MANUAL IIMITSUBISHI FX2N-48MR-001 Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX2N-48MR-001
Max input / output points: 48 points.
Supply voltage: 100 – 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: relay.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
- Made in JAPAN
- Manufacturer: DELTA
- Product No. : DVP20SX211T
- Product type : DVP-SX2 2nd Generation Analog I/O Slim PLC
- PLC Model : DVP20SX211T
- Product Series: DVP Series
- Inputs Outputs points / unit: 20 points
- Models: S-TYPE Main Processing Unit
- DC Input : H TYPE
- Transistor
- DVP-SX2 2nd Generation Analog I/O Slim PLC
- Shipping Weight : 1.5 Kg
Out of stock
Series MELSEC-F SERIES
Type FX3U
Power Supply (V) 24
Current Type DC
Integrated Analogue Inputs 4
Input Voltage Range (V) 0-10
Input Current Range (mA) 4-20
Min. Ambient Temperature (°C) 0
Max. Ambient Temperature (°C) 55
MADE IN JAPAN
1 in stock
3 in stock
Series MELSEC-F SERIES
Type FX3U
Power Supply (V) 24
Current Type DC
Integrated Analogue Inputs 4
Input Voltage Range (V) 0-10
Input Current Range (mA) 4-20
Min. Ambient Temperature (°C) 0
Max. Ambient Temperature (°C) 55
MADE IN JAPAN
1 in stock
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
2 in stock
| SERIES | MELSEC-F SERIES |
|---|---|
| TYPE | FX3U |
| INTERFACE | USB |
2 in stock
Reviews
There are no reviews yet.