Mitsubishi Fx2N-8Ex-Es/Ul Programmable Controller 24Vdc 5Ma

Brand :

DELTA

Product Type :

Electronics & Accessories

Model :

DVP14SS211R

Power Supply :

24V DC

Number of Inputs :

8

Number of Outputs :

6

Output Rating :

1.5 A

Origin :

China

• Manufacturer : DELTA
• Product No. : DVP-16SM11N
• Product type : I/O Extension Module
• Input type : DC Type (Sink or Source)
• Voltage/Input current : 24 V DC 5 mA
• Active level : Off – On: more than 16.5 V DC
• On – Off: less than 8 V DC
• Response time : Approx. 10ms
• Circuit isolation : By photocoupler
• Input display : LED

Delta: Analog Input Module (DVP04AD-S)

The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ 8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.

DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).