DVP10SX11T Delta PLC 24VDC 2AI/2AO 4DI/2DO transistor
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10> 10V)
Analog Out: 2 points (-20>20mA _ -10> 10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
Original price was: 20,000.00৳ .16,300.00৳ Current price is: 16,300.00৳ .
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN transistors
Analog In: 2 points (-20>20mA _ -10> 10V)
Analog Out: 2 points (-20>20mA _ -10> 10V)
COM: 2 RS232/RS485 ports
Original
Made in Taiwan
Related Products
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
2 in stock
| SERIES | MELSEC-F SERIES |
|---|---|
| TYPE | FX2N |
| OCCUPIED I/O POINTS ON PLC | 8 |
| INTEGRATED DIGITAL INPUTS | 8 |
Made in JAPAN
4 in stock
Delta: Analog Input Module (DVP04AD-S)
The A/D Conversion – In industrial automation, many measuring units are transmitted by analog signals. The most frequently adopted range for the signals are voltage -10 ~ 10V and current -20 ~ 20mA. To use the analog signals as the parameters for PLC operations, you have to convert them into digital values first. For example, the voltage -10 ~ 10V is first converted into values -8,000 ~ 8,000 by an A/D module, and the PLC will read/write the control registers (CR) in the AD module by FROM/TO instructions. The signals sent back to the PLC for operations will be digital K-8,000 ~ K8,000.
DVP04AD (or DVP06AD) analog signal input module receives external 4 (or 6) points of analog input signals (voltage or current) and converts them into 14-bit digital signals. The MPU can read/write the data in the module by using FROM/TO instructions in the program. There are 49 16-bit control registers in the module. You can select voltage input or current input by the wiring. Range for voltage input: ±10V (±8,000, resolution: 1.25mV). Range for current input: ±20mA (±4,000, resolution: 5μA).
2 in stock
| odel | ATO-DVP-ES2 | ||||||
| Builit-in I/O | 16 / 20 / 24 / 32 / 40 / 60 I/O points | ||||||
| Power Supply | 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5% | ||||||
| Connector | European standard removable terminal block (Pin pitch: 5mm) | ||||||
| Operation | ATO-DVP-ES2 PLC starts to run when the power rises to 95~100V AC and stops when the power drops to 70V AC. If the power is suddenly cut off, the PLC will continue running for 10ms. |
||||||
| Power Supply Fuse | 2A / 250V AC | ||||||
| Power Consumption | 30VA | ||||||
| DC 24V Current Output *1 | 500mA | ||||||
| Power Supply Protection | DC 24V output short circuit protection | ||||||
| Voltage Withstand | 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE) | ||||||
| Insulation Resistance | >5MΩ at 500VDC (between all I/O points and ground) | ||||||
| Noise Immunity | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
||||||
| Grounding | The diameter of grounding wire shall not be less than that of L, N terminal of the power supply. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
||||||
| Environment | Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2 Storage: -25°C~70°C (temperature), 5~95% (humidity) |
||||||
| Approvals | UL508, European community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC | ||||||
| Vibration/Shock Immunity | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||||||
| Weight | See below “Selection Table” | ||||||
| Note: *1. It is suggested that the power output should not be supplied to HMIs. |
|||||||
2 in stock
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 16 |
| Integrated Digital Outputs | 16 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 35 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Made in Japan
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-16EX-ES/UL
- Product type : Input Module Extension Block
- Integrated Inputs : 16 (24 VDC)
- Integrated Inputs / Outputs : 16
- ON Voltage (Max.) : Relay version: < 240 VAC, < 30 VDC; Transistor version: 5 – 30 VDC; Triac version: 85 – 242 VAC
- Stocked Item : S
- 5VDC Current Consumption (mA) : 4
2 in stock
- Manufacturer : Mitsubishi Electric
- Product No : FX3U-32MT / ES-A
- Product type : Main units with 32 I/O
- FX3U-32MT / ES-A is the third generation in their family FX Series PLC is a compact PLC and successful form of Mitsubishi Electric.
- A new special feature is the system “bus adapter” supplemented for bus systems useful for extended special features and block network communications.
- Extended special features and block network communications.
- Maximum Likelihood can expand up to 10 blocks on the new bus.
- The CPU with 32 I / O: 16 inputs and 16 outputs transistor (S)
- Power supply: 100 -240 VAC
- Power: 35 W
- Memory program: 64,000 Steps
- Integrated real-time clock: 16 (100 Khz).
- Counter: 235
- Timer: 512
- Integrated portal RS232C, RS485
- Origin: Mitsubishi – Japan
- Shipping Weight: 2 kg
1 in stock
- Manufacturer : Mitsubishi Electric
- Product No. : FX3U-32MR/ES-A
- Product type : Main Units with 32 I/O
- Max.Number Input/Output : 32
- No. of Inputs : 16
- No. of Outputs : 16
- Type of Output : Relay
- Power Supply : 100-240V AC
- Power Consumption : 35W
- Made in Japan
1 in stock
Analog I/O Module
● 4 points of analog input voltage (-10 V ~ +10 V) / current (-20 mA ~ +20 mA)
● 2 points of analog output voltage (0 V ~ +10 V) / current (0 mA ~ +20 mA)
● Input / output resolution: 12-bit
● Built-in RS-485 interface
● Single-ended input
Product category
PLC
sub-category
DVP Slim Series
Partner name
Delta
Series name
DVP-Slim Expansion
Attributes
PLC Module
Expansion Module
I/O Selection
Mix AI/AO
Supply
24VDC
Output Type
N.A.
In Built
1 in stock
Specifications for this Product:
| Attribute | Value |
| Manufacturer | Delta Electronics |
| PLC Model | DVP16SP11T |
| Product Series | DVP Series |
| I/O points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Voltage – Supply | 100 ~ 240VAC, 24V DC |
| Output Type | Transistor |
| DC Input | H type |
| Mounting Type | Din Rail |
| Termination Style | Pluggable Screw Terminal |
| Maximum Operating Temperature | 55°C |
| Minimum Operating Temperature | 0°C |
2 in stock
DELTA PLC DVP40ES200R 100-240VAC 24DI 16DO Relay Output
Extended Product Type : DVP-ES2series
Product ID: DVP40ES200R
Delta Type Designation : DVP-ES2 series
1 in stock
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-4AD
- Product type : Analog Input Modules
- Power Supply: 5 VDC/30 mA (from main unit); 24 VDC/55 mA
- Analog Channels: 4 inputs
- Analog Input Range: -10 to + 10 VDC / -20 to +20mA DC / 4 to 20 mA DC
- Resolution (voltage): 5mV (11 bit + sign)
- Related I/O points: 8
- Weight : 0.30 Kg
1 in stock
Reviews
There are no reviews yet.