DVP40ES200R |DELTA| 100-240VAC 24DI 16DO Relay Output
DELTA PLC DVP40ES200R 100-240VAC 24DI 16DO Relay Output
Extended Product Type : DVP-ES2series
Product ID: DVP40ES200R
Delta Type Designation : DVP-ES2 series
Original price was: 26,000.00৳ .21,000.00৳ Current price is: 21,000.00৳ .
Specification of Delta PLC DVP40ES200R
MPU points: 16 / 20 / 24 / 32 / 40 / 60
Program capacity: 16k steps
Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta’s AC motor drives
Password protection: Password for subroutine, user ID, restriction on trial times
Highly efficient instruction efficient instruction execution
Power supply voltage : 100 ~ 240VAC (-15% ~ 10%); 50/60Hz + – 5%
Power consumption : 30VA
DC24V current output : 500mA
Related Products
- Manufacturer: DELTA
- Product No. : DVP20SX211T
- Product type : DVP-SX2 2nd Generation Analog I/O Slim PLC
- PLC Model : DVP20SX211T
- Product Series: DVP Series
- Inputs Outputs points / unit: 20 points
- Models: S-TYPE Main Processing Unit
- DC Input : H TYPE
- Transistor
- DVP-SX2 2nd Generation Analog I/O Slim PLC
- Shipping Weight : 1.5 Kg
Out of stock
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Local I/O Points | 256 |
| Local Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| RS-422 | 1 |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Manuals
1 in stock
|
Features
|
|
| Brand Name : | Mitsubishi |
| Type of Product : | PLC Main Units with 64 I/O |
| No. of Inputs (Digital/Analog) : | 32 Input Points |
| No. of Outputs (Digital/Analog) : | 32 Relay Output |
| Output Type : | Relay |
| Usage : | FX3U Series |
Made in JAPAN
1 in stock
- Manufacturer : Mitsubishi Electric
- Product No : FX3U-32MT / ES-A
- Product type : Main units with 32 I/O
- FX3U-32MT / ES-A is the third generation in their family FX Series PLC is a compact PLC and successful form of Mitsubishi Electric.
- A new special feature is the system “bus adapter” supplemented for bus systems useful for extended special features and block network communications.
- Extended special features and block network communications.
- Maximum Likelihood can expand up to 10 blocks on the new bus.
- The CPU with 32 I / O: 16 inputs and 16 outputs transistor (S)
- Power supply: 100 -240 VAC
- Power: 35 W
- Memory program: 64,000 Steps
- Integrated real-time clock: 16 (100 Khz).
- Counter: 235
- Timer: 512
- Integrated portal RS232C, RS485
- Origin: Mitsubishi – Japan
- Shipping Weight: 2 kg
1 in stock
FX2N-48MR-001 datasheetPDF datasheet
FX2N-48MR-001 PROGRAMMING MANUAL IIMITSUBISHI FX2N-48MR-001 Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX2N-48MR-001
Max input / output points: 48 points.
Supply voltage: 100 – 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: relay.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
- Made in JAPAN
| odel | ATO-DVP-ES2 | ||||||
| Builit-in I/O | 16 / 20 / 24 / 32 / 40 / 60 I/O points | ||||||
| Power Supply | 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5% | ||||||
| Connector | European standard removable terminal block (Pin pitch: 5mm) | ||||||
| Operation | ATO-DVP-ES2 PLC starts to run when the power rises to 95~100V AC and stops when the power drops to 70V AC. If the power is suddenly cut off, the PLC will continue running for 10ms. |
||||||
| Power Supply Fuse | 2A / 250V AC | ||||||
| Power Consumption | 30VA | ||||||
| DC 24V Current Output *1 | 500mA | ||||||
| Power Supply Protection | DC 24V output short circuit protection | ||||||
| Voltage Withstand | 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE) | ||||||
| Insulation Resistance | >5MΩ at 500VDC (between all I/O points and ground) | ||||||
| Noise Immunity | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
||||||
| Grounding | The diameter of grounding wire shall not be less than that of L, N terminal of the power supply. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
||||||
| Environment | Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2 Storage: -25°C~70°C (temperature), 5~95% (humidity) |
||||||
| Approvals | UL508, European community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC | ||||||
| Vibration/Shock Immunity | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||||||
| Weight | See below “Selection Table” | ||||||
| Note: *1. It is suggested that the power output should not be supplied to HMIs. |
|||||||
2 in stock
| Type | FX3U |
|---|---|
| Power Supply (V) | 100-240 |
| Current Type | AC |
| Program Memory | 64K STEPS |
| Program Memory Unit | RAM |
| Integrated Digital Inputs | 24 |
| Integrated Digital Outputs | 24 |
| Integrated Analogue Inputs | N/A |
| Output Type | RELAY |
| Output Logic | N/A |
| Local I/O Points | 256 |
| Local Remote I/O Points | 384 |
| Expandable | YES |
| Cycle Time LD (ns) | 65 |
| Cycle Time MOV (ns) | 642 |
| USB | OPTION |
| Ethernet Port | N/A |
| RS-232 | N/A |
| RS-422 | 1 |
| RS-485 | N/A |
| Power Consumption (W) | 40 |
| Buffer Battery | YES |
| Protection Class | IP10 |
| Min. Ambient Temperature (°C) | 0 |
| Max. Ambient Temperature (°C) | 55 |
| Series | MELSEC-F SERIES |
Product Dimensions & Weight
| Width (mm) | 182 |
|---|---|
| Height (mm) | 90 |
| Depth (mm) | 86 |
| Weight (kg) | 0,85 |
2 in stock
| SERIES | MELSEC IQ-F SERIES |
|---|---|
| TYPE | DC INPUT (SINK/SOURCE) |
| POWER SUPPLY (V) | 24 |
| CURRENT TYPE | DC |
| OCCUPIED I/O POINTS ON PLC | 16 |
| INTEGRATED DIGITAL INPUTS | 16 |
Made In JAPAN
1 in stock
DVP32ES200R
Delta Products Programmable Logic Controllers, DVP-ES2 Series
Brand: Delta
Model: DVP-32ES200R
Supply Voltage: 24VDC
Digital Inputs: 16
Digital Outputs: 16
Output Type: Relay type
4 in stock
| SERIES | MELSEC-F SERIES |
|---|---|
| TYPE | FX3U |
| INTERFACE | USB |
2 in stock
DVP10SX11T
DVP S-Series Analogue CPU
Input: 6 Sink/Source 24VDC
Output: 2 NPN Transistor
Analog In: 2 points (-20>20mA _ -10> 10V)
Analog Out: 2 points (-20>20mA _ -10> 10V)
COM: 2 RS232/RS485 ports
Delta’s high-performance, high-speed DVP series PLCs are the most efficient and incorporate communication capabilities. Benefits include numerous convenient built-in controls for easy access to operations and monitoring of communication functions. The module-type unit offers huge space savings, allowing easy clip-on expansion possibilities. The high performance and large I/O units of the PLCs are a high value solution for machine control and industrial automation.
Common features
Adopts 32-bit CPU
Clip-on extension modules – general (right side)
Plug-in terminals for easy wiring and maintenance
Compact size (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high-speed counters up to 100-200 kHz (depending on model)
Dual RS232 and RS485 MODBUS ASCII / RTU compatible communication ports
Program language: instruction list (IL), ladder diagram (LD), sequential function diagram (SFC)
SX2 series digital and analogue I/Os
The slim-type SX2-series PLC offers 6/14 digital and 12-bit analogue I/O points built-in. It is extendable with the DVP-S series left- and right-side extension modules.
Key features:
No battery required
Execution speed: LD: 0.35 ?s
Supports 2-axis linear and arc interpolation
High speed counters: 2 x 100kHz and 6 x 10kHz
High speed pulse output: 2 x 100kHz and 2 x 10kHz
Program capacity: 16k steps / data log: 10k words
Supports DVP-S series left-side (high-speed) expansion modules
Supports standard MODBUS ASCII / RTU protocol and PLC connection function
1 in stock
| SERIES | MELSEC-F SERIES |
|---|---|
| TYPE | FX2N |
| OCCUPIED I/O POINTS ON PLC | 8 |
| INTEGRATED DIGITAL INPUTS | 8 |
Made in JAPAN
4 in stock
Reviews
There are no reviews yet.